992
4.10
Option Programming
CO Line Group (Trunk Group) Additional Informatibn
Description
This program is provided for the future use. Programming
procedures only are shown here.
Selection
CO line group
(TRG)
number:
1 through 8, *
( * =all CO
line groups)
Default
Not applicable.
Programming
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Enter 992.
Display: TRG Add Inf.
Press
NEXT.
Display: TRK GRP NO?->
Enter a
CO line group number.
Display example: 1111111111111111
Keep pressing +- or + to move the cursor to the desired field.
Enter your
selection (0 or 1).
To change the current entry,
press
STORE and the new selection.
To program another field, repeat steps 4 and 5.
Press
STORE.
To program another CO line group, press
SELECT
and the
desired CO
line group number.
Repeat steps 4 through 8.
Press
END.
Conditions
None
Feature References
None
4-136 System Programming
To Next Page
Loading...
