52 .
Default Values
1
Address
Program
Default
[33 11
ARS Modify Added Number
Not Stored
[332] Extra Entry Table Selection
Except-2
[333] TRS Entry Code Assignment for
Not Stored
Extra Table
CO
Line Programming
[400] CO Line Connection Assignment
[401] CO Line Group Assignment
Ail CO Lines=Connect
COO 1 =TRG 1; C002=TRG 2;
C003=TRG 3; C004=TRG 4;
COOS=TRG 5; C006=TRG 6;
C007=TRG 7;
C008=TRG 8 (XX-TD816);
COO8 through C024=TRG8 (RX-TD 1232)
[402] Dial Mode Selection
All CO Lines=DTMF
[403] Pulse Speed Selection
All CO Lines=10 pps
[404] DTMF Time
All CO Lines=80 ms
[405] CPC Signal Detection Incoming Set All CO Lines=400 ms
[406] Caller ID Assignment All CO Lines=Disable
[407]-[408] DIL 1: 1 Extension-Day/Night All CO Lines=Disable-Day/Night
[409]-[410] Intercept Extension-Day/Night All CO Line Groups=Disable-Day/Night
[41 l] Host PBX Access Codes
Not Stored
[412] Pause Time
All CO Line Groups= 1.5 s
[413] Flash Time
All CO Line Groups=600 ms
[4 141 Disconnect Time
All CO Line Groups=l.5 s
[415] CPC Signal Detection Outgoing Set Disable
[416]* Reverse Circuit Assignment Regular
COS Programming
[500]-[50
l] Toll Restriction Level-Day/
All COS=Level l-Day/Night
Night
[502] Extension-to-CO Line Call Duration All COS=Disable
Limit
[503] Call Transfer to CO Line
All COS=Enable
[504] Call Forwarding to CO Line
All COS=Disable
[505] Executive Busy Override
All COS=Disable
[506] Executive Busy Override Deny
All COS=Enable
[507] Do Not Disturb Override
All COS=Disable
[508] Account Code Entry Mode
All COS=Option
Extension Programming
[600]
Extra Device Port
All Jacks=Disable
rtm
Class of Service All Jacks-1/2=COS 1
5-6
List
*: Available for KX-TD8 16 only.
To Next Page
Loading...
