S
3 Features
System Working Report
Description
The Digital Super Hybrid System automatically records the
system’s working status condition. A printer connected to the EIA
(RS-232C) port can be used to print the recorded data. The
recorded data can be printed out by the operator or manager.
l
The date and time when cleared
l
The date and time when printed out
2. Incoming calls
l
The number of incoming calls
l
The number of answered incoming calls
l
The ratio of answered calls to incoming calls
Number of answered calls
Number of incoming calls
x lOO(%)
l
The average time from receipt of call to answer of the
incoming and answered calls
l
The average talk duration of the answered calls
3. Outgoing calls
l
The number of access requested
l
The number of access succeeded
l
The ratio of access succeeded
Number of access succeeded
Number of access requested
x loo (%)
. The average duration of the dialed calls
These records can be deleted by the operator or manager and new
data will be recorded thereafter.
Conditions
l
Connect a printer provided with an EIA (RS-232C) connector to the
main unit.
l
Referring and deleting the system working report can be done using an
EIAhemote programming software.
Connection References
Section 2, Installation
2.3.9
Printer Connection
To Next Page
Loading...
