43
l
System Programming
106
Station Hunting Type
Description
Used to enable or disable hunting and set the Station Hunting type
for each extension group. There are six Station Hunting types
available: Circular, Termination, Voice Mail (VM), Automated
Attendant (AA), Ring Group and Uniform Call Distribution (UCD).
If circular hunting is assigned for a group, all the extensions in the
group are hunted until an idle one is found. If termination hunting
is assigned, hunting stops at the extension which has the largest
jack number in the group. If VM hunting is assigned, all the VM
ports of an extension group are hunted until an idle one is found
which permits Voice Mail Service. If AA hunting is assigned, all
the AA ports of an extension group are hunted until an idle one is
found which permits AA Service. If Ring Group is assigned, all the
extensions in the ring group ring simultaneously. If UCD is
assigned, group members are hunted in a circular way.
Selection
Default
Programming
l
Extension group number:
1 through 8, * (*
=a11 extension
groups)
l
Disable
(no hunting) /
Terminate
(termination) /
Circular / VM
(voice mail) /
AA
(automated attendant) /
RING / UCD
All extension groups - Disable
1.
2.
3.
4.
5.
6.
7.
8.
Enter 106.
Display:
106
STATION HUNT
Press
NEXT.
Display: EXT GRP NO?+
Enter an extension group number.
To
enterextension group number 1
,you can
also press
NEXT.
Display example: Groupl: Disable
Keep pressing
SELECT
until the desired selection is
displayed.
‘_
Press
STORE.
To program another extension group, press
NEXT
or
PREV,
or
SELECT
and the desired
extension group number.
Repeat steps 4 through 6.
Press
END.
43
To Next Page
Loading...
