109
43
l
System Programming
Expansion Unit Type
Description
Assigns the type of expansion units to be used in the system.
This allows the system to identify the unit in each expansion unit
location..
Selection
KX-TD8 16
l
Areas1;2=C/D/E/A
(C: 4-CO Line Unit / E: 8-Station Line Unit
/
A, D: no use)
KX,TD1232
l
Master / Slave
l
Areas1;2;3- C/D/El/E2/Al/A2
(C: 4-CO Line Unit /
El: 8-Station Line Unit 1 /
E2: 8-Station Line Unit 2 / Al, A2, D: no use)
Default
KX-TD8 16: C;E
KX-TD1232: Master and Slave - C;El ;E2
Programming
RX-TDS16
1.
Enter
109.
Display:, 109 EXPAND C, El
2. Press NEXT.
Display example: Master:C ;E
3.
Keep pressing SELECT until the desired selection of Area 1
is displayed.
4.
5.
Press a to program Area 2, if required.
Keep pressing SELECT until the desired selection of the
Area 2 is displayed.
_. 6.
7.
Press STORE.
Press END. ‘_
KX-TD1232
1.
Enter
109.
Display
:
109
EXPAND C, El
2.
Press NEXT to program the Master System.
46
To Next Page
Loading...
