216
44 0
Timer Programming
- Message
Waiting Ring Interval Time
Description
Sets the Message Waiting ring interval time for a single line
telephone.
Selection
Time (minutes)
: 0
through 64
Default
0 min (no ring)
Programming
1.
2.
3.
4.
5.
Enter 216.
Display
:
216 M-W RING TIME
Press
NEXT.
Display example: Interval: 0 min
Enter the time.
To
change the
current entry, press CLEAR
and enter the new time.
Press STORE.
Press END.
Conditions
l
When the interval time is set to “0,” the telephone does not ring for
Message Waiting notification.
l
Selecting the message waiting ring type, 3 quick rings or 2 normal
rings, in program [990) “System Additional Information, Field (40)” is
available. If you prefer soft ringing, select “3 quick rings.” in this case,
there may be some kinds of telephones which do not ring.
Feature References
Section 3,
Features,
Message Waiting
60
To Next Page
Loading...
