Default Values
[617] Live Call Screening Recording Mode All Jacks=Stop Ret
Assignment
Resource Programming
[800]
SMDR Incoming / Outgoing Call Outgoing Calls=All; Incoming Calls=On
Log Printout
[801] SMDR Format
Page Length=66; Skip Perforation=0
[802] System Data Printout
Not Applicable
[803] Music Source Use
Hold and BGM=Music 1
[804] External Pager BGM All External Pagers=Disable
[805] External Pager Confirmation Tone
On
[806]-*[807] Serial Interface (RS-232C) New Line Code=CR+LF; Baud Rate=9600;
Parameters Word Length=8; Parity Bit=Mark; Stop Bit=1
- Poltl/Port2
*[809]
DISA Security Type
Trunk (Outside Line) Security
*[810]
DISA Tone Detection
Enable
*[81 l] DISA User Codes Code
01=0001=C0S 8;
Code 02=0002=COS 8;
Code &0032=COS 8
*[812]
DISA DTMF
Repeat Dial and Call=Repeat
[813] Floating Number Assignment
l
RX-TD816: Pager 1=196; E-Group 1=191;
E-Group 2=192; E-Group 3=193;
E-Group 4= 194; E-Group 5=29 1;
E-Group 6=292; E-Group 7=293;
E-Group 8=294;
l
KX-TD1232: Pager 1=196; Pager 2=197;
Pager 3=296; Pager 4=297; DISA 1=198;
DISA 2=298; MODEM=299
E-Group 1=191; E-Group 2=192;
E-Group 3=193; E-Group 4=194;
E-Group 5=29 1; E-Group 6=292;
E-Group 7=293; E-Group 8=294
*[814]
Modem Standard
BELL
*[815] DISA Built-in Auto Attendant Disable
*[817] KX-TD197 Baud Rate Set
V.34-33600
Optional Programming
[990]
System Additional Information
See pages 4-205 through 4-210.
[99 l] COS Additional Information
See page 4-212.
‘*: Available for the KXTD1232
only.
t:
Available when the Digital Super Hybrid System is connected to a
Digid
Proprietary Telephone capable Panasonic Voice Processing System (one
that supports digital oroorietarv teleDhone inteaatinn- P D KY-‘lWQl Ml
27
To Previous Page
Loading...
