2.4.4 Installing Expansion Unit
.c
(KX-TD170 / KX-TDMO).
7.
8.
9.
Tie up all the cords into a bundle. If
other cords are coming from the upper
cabinets, tie them, too.
Close the cabinet cover and secure the
outside screw.
Cover the cords with the cord holder
(included).
2-46
Installation
n
If KX-TD170 is to be installed;
Insert the connector into the jack.
For
details,
refer to Section 2.5 “Auxiliary Connection for Power Failure Transfer.”
(for KX-TD1232)
Jack for Power
Failure Transfer t
- To extensions
(Jacks 17-24 or 25-32)
Notes
l
For Cable Pin Numbers to Be Connected, see page 2-18.
l
For fixing the connector, see page 2-48.
10.
Fix the cords to the wall at the
shown position so that the front
cover can be opened.
To Next Page
Loading...
