Panasonic KX-TD816 - Page 87

2.4.8
Doorphone and Door Opener
Connection
To connect up to two doorphones (KX-T30865) and up to t&o door
openers (user-supplied), a Doorphone Card (KX-TD160) is
required.
Installing the Doorphone
Doorphone Card Installation
1. Loosen the screw to separate
doorphone into two halves.
the
1. Connect a 4-conductor modular connector
to the Doorphone Card Cabinet, and pass
the cord through the groove on the cabinet:
2. Install the base cover to the wall with two
screws.
H
Note Two kinds of screws are included.
Please choose an appropriate one
depending on your wall type:
----- Type 1: When the doorphone
plate has been fixed to
the wall.
@=------- Type 2: When you wish to
install the doorphone
directly to the wall.
3. Connect the wires from the terminal box to
the screws located in the front cover.
To the terminal box
(See
the following page.) +
4. Secure both halves together and re-install the
screw.
2.
3.
Attach the Doorphone Card Cabinet to the
main unit and press it down.
Connect the cord to the Doorphone Card
Connector.
KX-TD1232
KX-TD816
To Terminal
-*
Box
Installation 2-53