2.4.9 System Connection*
Notes
8. Open the ROM Cover in the Slave System and set
the Master/Slave Switch on the CPU Card to
“Slave” position.
9. Turn the power on.
l
System Connection is completed about one minute later after the power
is turned on.
. To turn the power on for the first time, refer to Section 2.6 “Starting the
System for the First Time.”
l
Programming References
No programming required.
Feature References
Section
3,
Features,
System Connection
2-58
Installation
*: Available for KX-TD 1232 only.
To Next Page
Loading...
