Unattended Conference—Disconnect Timer
Specifies the length of time until an Unattended Conference is disconnected after the parties involved in the
conference receive a warning tone but the conference originator does not return to the conference.
Default
15 s
Value Range
0–240 s
Maintenance Console Location
4.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
3.1.16 Conference
Miscellaneous
Caller ID—Waiting to receive
Specifies the length of time that the PBX waits to receive Caller ID from an analog CO line. If the Caller ID is
received through an analog CO line card on which no Caller ID card is mounted or through a port to which
Caller ID Detection is disabled, this timer is not applicable.
Default
5 s
Value Range
0–15 s
Maintenance Console Location
4.4 [2-3] Timers & Counters
Programming Manual References
8.1 [6-1] System Speed Dial
5.3 [3-1-3] Caller ID Modification
Feature Manual References
3.1.1 Caller ID
Document Version 2010-11 PC Programming Manual 261
4.4 [2-3] Timers & Counters
To Next Page
Loading...
