Panasonic KX-TDA50 - Page 262

Caller ID—Visual Caller ID Display
Specifies
the length of time that a Caller ID number, with the Call Waiting tone offered by an analog line from
the telephone company, is shown on the display. The Caller ID number flashes on the display for five seconds,
followed by a 10-second pause, then flashes again for five seconds.
Default
30 s
Value Range
0–250 s
Maintenance Console Location
4.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
3.1.1 Caller ID
3.1.9 CALL WAITING FEATURES
3.1.10 Call Waiting Tone
Extension PIN—Lock Counter
Specifies
the number of successive incorrect PIN entries allowed before the extension PIN is locked. A locked
extension PIN can not be used until reset from the extension assigned as manager. (Specifying "None" disables
this counter.)
Default
None
Value Range
None, 1–15
Maintenance Console Location
4.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
20.1.1 Walking COS
19.1.1 Verification Code Entry
5.1.6 Extension PIN (Personal Identification Number)
262 PC Programming Manual Document Version 2010-11
4.4 [2-3] Timers & Counters