Panasonic KX-TDA50

Value Range
8 ´ n (n=1–5) ms
Maintenance Console Location
3.4 [1-1] Slot—Card Property - Extension Type
Programming Manual References
None
Feature Manual References
None
SLT Flash Detection
Enables
the PBX to detect the flash signal sent when an SLT user presses the hookswitch or the Flash/Recall
button.
Default
Enable
Value Range
Disable: The PBX disconnects the line to prevent placing the call on hold.
Enable: The PBX places the call on consultation hold.
Maintenance Console Location
3.4 [1-1] Slot—Card Property - Extension Type
Programming Manual References
None
Feature Manual References
3.1.7 Call Splitting
Flash Timing - Min.
Specifies
the minimum length that a signal sent from an SLT must be for the PBX to recognize it as a hookswitch
flash signal.
Default
112 ms
Value Range
8 ´ n (n=3–63) ms
Document Version 2010-11 PC Programming Manual 83
3.4 [1-1] Slot—Card Property - Extension Type