Panasonic Lumix S1R

8. Metering/Exposure/ISO Sensitivity
193

Setting Items (ISO Sensitivity)
¢1 Default setting. The upper limit can be changed with [ISO Sensitivity (photo)].
¢2 Default setting. The upper limit can be changed with [ISO Sensitivity (video)].
0 When the following functions are being used, the ISO sensitivity that can be set is
restricted.
– [High Resolution Mode]: Up to an upper limit of [ISO3200]
– [Filter Settings]: Down to a lower limit of [ISO100], up to an upper limit of
[ISO6400] (The lower limit changes to [ISO400] when [High Dynamic] is set.)
– [Multiple Exposure]: Down to a lower limit of [ISO100], up to an upper limit of
[ISO6400]
– [Like709] ([Photo Style]): Down to a lower limit of [ISO100]
– [Standard(HLG)]/[Monochrome(HLG)] in [Photo Style]: Down to a lower limit of
[ISO320]
[AUTO]
The ISO sensitivity is automatically adjusted according
to the brightness.
Confirm ISO sensitivity by pressing the shutter button
halfway.
0 Taking picture: Maximum [ISO6400]
¢1
0 Video recording: Maximum [ISO6400]
¢2
[100] to [25600]
The ISO sensitivity is fixed at the selected value.
0 You can extend the ISO sensitivity range in between
a lower limit of L.50 and an upper limit of H.51200 by
setting [Extended ISO] (l 327) to [ON] in the
[Custom] ([Image Quality]) menu.
0 You can set upper and lower limits for ISO auto when taking pictures:
–[ ] ¨ [ ] ¨ [ISO Sensitivity (photo)] (l 306)
–[ ] ¨ [ ] ¨ [ISO Sensitivity (video)] (l 319)
0 You can change the intervals between ISO sensitivity settings values:
[] ¨ [ ] ¨ [ISO Increments] (l 327)
0 You can change the operation of the [ISO] button:
[] ¨ [ ] ¨ [WB/ISO/Expo. Button] (l 335)
0 You can set the upper limit for ISO auto on the ISO sensitivity settings screen:
[] ¨ [ ] ¨ [ISO Displayed Setting] (l 335)