14. Menu Guide
323
[Audio] ¨ ¨
[Wind Noise
Canceller]
[HIGH]/`[STANDARD]/[OFF]
—
This reduces the wind noise coming into the built-
in microphone while maintaining sound quality.
0 [HIGH] effectively reduces the wind noise by
reducing the low-pitched sound when a strong
wind is detected.
0 [STANDARD] extracts and reduces only the
wind noise without deteriorating the sound
quality.
0 You may not see the full effect depending on the
recording conditions.
0 This function works only with the built-in
microphone.
When an external microphone is connected,
[Wind Cut] is displayed. (l 255)
[Wind Cut]
[HIGH]/[STANDARD]/[LOW]/`[OFF]
l 255
This reduces wind noise when an external
microphone is connected.
[Mic Socket]
`[ ]/[ ]/[ ]
l 253
Sets the [MIC] socket input method that suits the
device to be connected.
[Special Mic.]
`[STEREO]/[LENS AUTO]/[SHOTGUN]/
[S. SHOTGUN]/[MANUAL]
l 254
Sets the sound pickup range when using the
Stereo Shotgun Microphone (optional).
[XLR Mic Adaptor
Setting]
`[ON]/[OFF]
l 256
Enables recording from the XLR Microphone
Adaptor (optional).
[Sound Output]
`[REALTIME]/[REC SOUND]
l 257
Sets the audio output method when headphones
are connected.
To Next Page
Loading...
