Panasonic Lumix S1R User Manual

14. Menu Guide
340
[Monitor / Display] ¨ ¨
[Histogram]
[ON]/`[OFF]
This displays the histogram.
Turning this [ON] displays the histogram transition screen.
Press 3421 to set the position.
Positions can be moved to the diagonal directions using the
joystick.
0 You can also move the position by dragging the histogram
on the recording screen.
0 A histogram is a graph that displays
brightness along the horizontal axis,
and the number of pixels at each
brightness level on the vertical axis.
By looking at the distribution of the
graph, you can determine the current
exposure.
A Dark
B Bright
0 When the recorded image and the histogram do not match
each other under the following conditions, the histogram is
displayed in orange:
– During exposure compensation
– When the flash fires
– When the correct exposure is not achieved, such as in
low light situations.
0 The histogram is an approximation in the recording mode.
0 This menu item can be registered to the Fn button.
(l 278)

Panasonic Lumix S1R Specifications

General

Sensor Resolution	47.3MP
Sensor Type	Full-frame CMOS
ISO Sensitivity	100-25600 (expandable to 50-51200)
Image Processor	Venus Engine
Image Stabilization	5-axis in-body image stabilization
Camera Type	Mirrorless
Sensor Size	36 x 24 mm
Lens Mount	L-Mount
Shutter Speed	1/8000 to 60 sec, Bulb
Connectivity	Wi-Fi, Bluetooth
Battery	DMW-BLJ31 Lithium-Ion
Dimensions	148.9 x 110.0 x 96.7 mm
Autofocus System	Contrast Detection AF System with DFD Technology
Viewfinder	5.76 million dots OLED EVF
LCD Screen	3.2-inch, 2.1 million dots, touch screen
Video Recording	4K up to 60p
Continuous Shooting	9 fps (AFS/MF), 6 fps (AFC)
Weather Sealing	Yes
Memory Card Slots	2x SD Card Slots (1x UHS-II Compatible)