Panasonic Lumix S1R

14. Menu Guide
348
[Monitor / Display] ¨ ¨
[I.S. Status Scope]
[ON]/`[OFF]
Displays a reference point on the
recording screen in order to let you
check for camera shake.
A Reference point
0 When the following functions are
being used, [I.S. Status Scope] is
not available:
– Video recording/[6K/4K PHOTO]/[Post-Focus]
0 This menu item can be registered to the Fn button.
(l 278)
[Lens / Others] ¨ ¨
[Lens Focus
Resume]
[ON]/`[OFF]
The camera saves the focus position when you turn it off.
[Focus Ring
Control]
`[NON-LINEAR]/[LINEAR]
[SET] [90°] to [360°] (`[150°])/[Maximum]
Sets the amount of movement for focusing using the focus
ring. (When using supported lenses)
0 The interchangeable lens (S-R24105) supplied with Lens
Kit products supports this function.
[NON-LINEAR]: Focus responds by accelerating according
to rotation speed of the focus ring.
[LINEAR]: Focus responds at a constant amount according
to the rotational angle of the focus ring.
[SET]: Sets the rotational angle of the focus ring for when
[LINEAR] is selected.
0 This menu item can be registered to the Fn button.
(l 278)