Panasonic Lumix S1R

14. Menu Guide
347
[Monitor / Display] ¨ ¨
[HLG View Assist]
[Monitor] [MODE1]/`[MODE2]/[OFF]
[HDMI] `[AUTO]/[MODE1]/[MODE2]/[OFF]
At recording or playback of [HLG Photo], this displays
images with converted colour gamut and brightness on the
camera monitor/viewfinder, or outputs these over HDMI.
[AUTO]: Converts images before outputting them via HDMI
while applying the effect of [MODE2]. This conversion
setting works only when the camera is connected to a
device that does not support HDR (HLG format).
[MODE1]: Converts with an emphasis on bright areas such
as sky.
[MODE2]: Converts with an emphasis on the brightness of a
main subject.
0 During the dynamic range conversion of HDR images,
[MODE1] or [MODE2] is displayed on the screen.
When the conversion is not performed, [HLG] is displayed.
0 This menu item can be registered to the Fn button.
(l 278)
[Sheer Overlay]
[ON]/`[OFF]
[SET] [Transparency]/[Image Select]/
[Reset at Power Off]
Displays recorded pictures by overlapping on the recording
screen.
0 Use [Image Select] to select the pictures to be displayed.
Press 21 to select pictures and then press or
to confirm.
0 When the following functions are being used, [Sheer
Overlay] is not available:
– Video recording/[6K/4K PHOTO]/[Post-Focus]
0 This menu item can be registered to the Fn button.
(l 278)