15. Wi-Fi/Bluetooth
375
Operating the camera in accordance with the smartphone
guide.
3
Set the camera to Bluetooth
pairing standby status.
≥ ¨ [ ] ¨ [ ] ¨ [Bluetooth]
¨ [Bluetooth] ¨ [SET] ¨ [Pairing]
≥The camera enters connection
standby status, and the device
name (A) is displayed.
4
On the smartphone, select the
camera device name.
0 (iOS devices) When a message to
confirm the change of destination is
displayed, select [Join].
5
When a message indicating
that device registration is
complete, select [OK].
≥A Bluetooth connection between
the camera and the smartphone will
be made.
0 The paired smartphone is registered as a paired device.
0 During Bluetooth connection, [ ] is displayed in the recording screen.
When the Bluetooth function is enabled, but a connection is not established
with the smartphone, [ ] appears translucent.
0 Up to 16 smartphones can be registered.
If you try to register more than 16 smartphones, the registration information
will be deleted from the oldest first.
XXXXXXXXXXXX
OK
To Next Page
Loading...
