16. Connecting to Other Devices
437
0 If [USB Mode] is set to [PC(Storage)] in the [Setup] ([IN/OUT]) menu, the
camera will be automatically connected to the recorder without the [USB
Mode] selection screen being displayed. (l 355)
0 Do not use any other USB connection cables except the supplied USB
connection cables (C–C and A–C).
0 Take care not to turn off the camera while storage is in progress.
0 Images such as 4K videos may not be supported depending on your recorder.
0 Turn off the camera and disconnect the USB connection cable before
removing the card from the camera. Otherwise, the recorded data may be
damaged.
0 For the storage and playback procedures, refer to the operating instructions
for the recorder.
To Next Page
Loading...
