1 General Information
General InformationGeneral Information
General Information
12
07-02-12-02-EN-V1215.doc / Type: 638
● Determining Criteria for the Utilization of the 638 Drive
Decisions relating to the appropriate selection of the motor type, feedback system and drive type,
as well as the system layout and option modules required, are dependant upon the specific
application and the anticipated operating mode of the system.
There are 6 operating modes to choose from:
• 0 Seed / Current control
switchable via Input X10.24
• 1 Speed control
• 2 Current control
• 3 Speed / Position control
switchable via Input X10.24
• 4 Position control without
BIAS – execution
• 5 Position control with
BIAS - execution
● Operation Configuration
There are opportunities ranging from simple current and speed control to programmable
position control processes (PLC), supported by the 1500 BIAS command blocks.
"BIAS" User shell for intelligent drive controls:
See Chapters: “■ Operation Modes“ and “■ Software“
This manual was downloaded on www.sdsdrives.com
+44 (0)117 938 1800 - info@sdsdrives.com
To Next Page
Loading...
Need help?
General
