Parker 638 series

2 Connection Assignments and Functions
Connection Assignments and FunctionsConnection Assignments and Functions
Connection Assignments and Functions
28
07-02-12-02-EN-V1215.doc / Type: 638
2.5 Service-Interface COM1 (RS232)
Functions:
 Supports all diagnostic and parameter configuration activities
 PC connection utilizing our communications cable KnPC/D
 Communication utilizing our operational program software
(EASYRIDER

Windows - Software)
Com 1 RS232 Function Drive Side RS232 on PC
PIN
PIN
4-Pin Modular Plug
RXD
1
Receive Serial Data
3
TXD
TXD
2
Send Serial Data
2
RXD
3
n.c. (not connected)
GND
4
Ground
5
GND
Order code Length
Description
KnPC637+/631-03.0 3 m PC-Side Sub D 09-Plug
KnPC637+/631-05.0 5 m Drive-Side 4-Pin RJ 10-Plug
Note:
The service interface port is not galvanically separated and should therefore not be used
as the operations interface port (fixed wiring)!
The network connection with the PC must be located near the Drive in order to receive the
reference potentials of the units together.
This manual was downloaded on www.sdsdrives.com
+44 (0)117 938 1800 - info@sdsdrives.com