Parker 638 series

9 Safe
Safe Safe
Safe Torque
TorqueTorque
Torque Off (STO)
Off (STO)Off (STO)
Off (STO)
07-02-12-02-EN-V1215.doc / Type: 638
79
8.6 Step : Operation Mode Selection
Action, Function Anticipated Result
Remark,
Cause of Fault
Condition
5.1 Prerequisite:
Step
+
+
+
 ☺ 
5.2



In the EASYRIDER configuration menu, select
„General“ and then select the appropriate
operating mode.
With the selection of the
operating mode, one must
also
select additional settings.
For example:
* On/Off Configuration
* Analog Setpoint Selection
and Integrator
* Position Blocks
* BIAS Program
* Fieldbus Interface
Additional
information
and assistance is
available through the
utilization of the
online
help for
EASYRIDER
Software.
On to Step 



☺




This manual was downloaded on www.sdsdrives.com
+44 (0)117 938 1800 - info@sdsdrives.com