Particle Measuring Systems LASAIR II 550L User Manual

Appendix D: TCP/IP Protocol: A Brief Overview
Page D-2 Lasair II Particle Counter Operations Manual
Ping
TCP/IP systems can use a utility named PING (Packet InterNet Groper) to test
station and network integrity. The TCP/IP-32 add-on protocol for Microsoft
Windows for Workgroups 3.11 includes a PING function that must be run from a
Windows DOS window.
To use the Windows for Workgroups TCP/IP PING:
1 With Windows running, open a DOS window by double-clicking on the MS-
DOS Prompt icon.
2 At the DOS prompt, type PING <IP ADDRESS> (using the address of the
device for which you wish to test the computer's LAN communications).
The PING utility will report whether or not the other device responded, and what
the response time was.
For more information on TCP/IP and networking fundamentals, please see the PMS
Serial Communications & Networking Manual.

Particle Measuring Systems LASAIR II 550L Specifications

General

Brand	Particle Measuring Systems
Model	LASAIR II 550L
Category	Measuring Instruments
Language	English