Particle Measuring Systems LASAIR II 550L User Manual

Using Edit Mode - - General Procedure
Lasair II Particle Counter Operations Manual Page 5-3
Using Edit Mode - - General Procedure
Setting parameter values in Lasair II particle counter Setup Screens
1 Verify that the screen has a blue pencil icon in the upper left
corner. If the icon is present, the screen is a setup screen and
values can be changed.
2 Press the Enter key to enable the Edit Mode.
3 Press the Tab Keys to move the cursor to the parameter to be
changed.
4 Press the Enter key to access the parameter.
5 Press the arrow or Enter keys to change the parameter.
6 Press Tab or Enter to record the desired setting.
7 Use the Return Arrow softkey to Exit the Edit Mode.

Particle Measuring Systems LASAIR II 550L Specifications

General

Brand	Particle Measuring Systems
Model	LASAIR II 550L
Category	Measuring Instruments
Language	English