Particle Measuring Systems LASAIR II 550L User Manual

Appendix G: Native Serial (RS-2332) Communications
Page G-4 Lasair II Particle Counter Operations Manual
C 23 chan max Set Analog 20 mA value. Set user analog channel maximum
engineering unit value.
C 24 chan units Set Analog Units. Set name for analog channel units.
C 25 chan [1/0] Enable/disable analog channel
C 32 hh Set Purge Delay Time Hours
C 33 min Set Purge Delay Time Minutes
C 34 sec Set Purge Delay Time Seconds
C 38 [1/0] Start sampling on Power Up
Unsupported C Commands
C commands dealing with alarms and manifold control are not supported.
(Manifold control with the Lasair II particle counter requires an AM-II and Ethernet
control.)
15 Group print
17 Count Alarm Enable
18 Count Alarm Print Enable
19 Count Alarm Size
20 Count Alarm Value
27 Manifold Sequence
28 Mixed-air alarm value
29 Search Alarm Value
30 Search Length Minutes
31 Search Length Seconds
37 Audible Alarm On/Off
39 Power Interrupt print
41 Count Alarm Diff/Accum
43 Count Alarm Conc
44 Analog Avg on/off
45 Analog Alarm Enable
46 Analog Alarm Max Value
47 Analog Alarm Min Value
48 Analog Alarm Print on/off
50 Laser Warning Print
52 Flow Error Print

Particle Measuring Systems LASAIR II 550L Specifications

General

Brand	Particle Measuring Systems
Model	LASAIR II 550L
Category	Measuring Instruments
Language	English