Pentax 67 II User Manual

6.23 Installation of the 1'' and 2"d shutter curtain (Assembly)
NB: Install the curtains with the mirror box
is un-charged state.
Sec [ 8. Curtain assembly J for details
on assembly
of the curtain.
I) O-E67 {Shaft plate A),
E93 (Shaft plate retainer screw),
E97 (Shaft plate E retainer screw)
Attach O-E67 section to the mirror box
and fix with E93 and E97.
2) EBO (Curtain shaft pedestal),
E93 (Shaft plate retainer screw) x2
Attach El I 0 to the mirror box and
fix with E93 x2 and CNM 1.7 x3.0.
3) E68 (Shaft plate B),
E93 (Shaft plate retainer screw)
Install E68 to the mirror box and
fix with E93 and CNS 1.7 x2.5.
4) E69 (Shafl plate C),
E93 (Shaft plate retainer screw) x2
Install E69 section to the mirror box
and fix with E93 x2.
6.24 Tension of the curtains
,. f-E93
I) Loosen CNL-Dl.4x2.0 x2 of the curtain installing section,
from zero tension
of curtains, wind the both curtains 2 to 3
turns clockwise. and tighten CNL-D 1.4
x2.0 x2 temporar y.
46170 27:340
CNM1 .7x3.0~ f - EgJ
E93

Pentax 67 II Specifications

General

Type	Medium format SLR
Film Format	120/220 roll film
Image Size	6x7 cm
Lens Mount	Pentax 67 bayonet mount
Metering	TTL center-weighted metering
Focusing Screen	Interchangeable
Mirror Lock-Up	Yes
Multiple Exposure	Yes
Shutter	Electronically controlled horizontal-travel cloth focal plane shutter
Shutter Speed Range	1/1000 to 4 s, Bulb
ISO Range	6 to 6400
Exposure Modes	Manual, Aperture Priority
Viewfinder	Interchangeable
Flash Sync Speed	1/30 s
Power Source	6V 4LR44 battery