102
9.3 Metered-Value Dierence Indicator
Keep pressing the AEL button [A] and the dierence between the metered
exposure value and the exposure of the new composition will be displayed
on the viewnder LCD. This function can be used to see if an object of very
dierent brightness levels can be properly photographed.
If the dierence between the set value and the metered value exceeds
6EV, the viewnder LCD blinks “– u –” for underexposure and “– o – ” for
overexposure.
By turning the front or rear dial in the AE lock mode, you can change the
aperture and shutter speed value without changing the exposure value that
is set when entered into AE lock mode.
In the P mode (Program AE) mode, turning either the front or rear dial shifts
the program to PH and PL. When in Av (Aperture priority AE) or Tv Shutter
priority AE), turning one of the dials changes both the aperture and shutter
speed values.
NOTICE:
The way to cancel the AE lock can be
changed. C-11 AEL function lock/unlock mode
[AEL]
Half-pressing of he shutter release button
can activate the AE lock mode. C-10 Release
button [HALF]
The assignment of the AEL button and AFL
button can be swapped by using C-09 AEL &
AFL button [AEFL]
Exposure compensation and auto-
bracketing function can be used when the
camera is in the AE lock mode in normal
operation or with the mirror locked up.
P
Av
Tv
M
X
CF
C1
C2
C3
A
To Next Page
Loading...
Need help?
General
