To Next Page

To Previous Page

7.1.10 Battery Type

The Phase One 645DF+ can be powered by three dierent battery types.

Select the battery type that you want displayed on the external LCD panel to

ensure the remaining battery charge is correctly displayed.

7.1.11 Bracketing

Select 3, 5 or 7 Exposures as the bracketing width for the auto bracketing

setting. Bracketing has to be activated via the 645DF+ camera body controls.

Go to page 100 to nd out more on Bracketing.

7.1.12 Front / Rear Dial

Interchange the function of the front and rear dials when the 645DF+ camera

is used in Manual exposure mode (M). Select Tv / Av to assign the front dial to

adjust the shutter speed (Tv = Time value) and the rear dial to the Aperture

value (Av). The Av /Tv reverses the aforementioned settings.

7.1.13 Rear Dial in P-mode

Assign which dial is used to alter the shutter and aperture value when

shooting in Program (P) exposure mode. Select Enable to use the rear dial in

P mode. Select the Disable option to activate the front dial.

Go to page 38 for more information about the Program exposure mode.

7.1.14 Dial Direction

Choose whether the front and rear exposure dials increase or decrease the

shutter speed, f-number and exposure compensation when rotated in a

clockwise (CW) direction.

PhaseOne IQ Series User Manual

Questions and Answers: