154
17.5 Cables Shipped with IQ back for the Contax 645
(Value added only)
Part# 50300143 Multi-connector to Lens sync (for use with Large format - in
two shot mode)
Part# 50300144 This cable is available as a separate purchase only.
From multi-connector to mini jack female (for use to adapt older Large
format wake-up cables or older Kapture Group one shot adaptor cables to
connect to the multiport).
Part# 50300154 From multi-connector to mini jack on the Contax handgrip
(used to enable Host Capture from Computer)
N.B. Operating the camera from the host computer
The supplied release cable must be connected between the multiple-pin
connector on the IQ back and the mini-jack connector placed at the bottom
of the handgrip on the Contax camera house.
To Next Page
Loading...
Need help?
General
