140
15.3 More Details: Hasselblad V Series
Sync Cable
A sync cable is always connected from the lens to the small connector in the
front plate on either the left or right side of the IQ back regardless of which
Hasselblad V type camera used.
Flash Lead Connection
A ash cable is always connected to the F-connector on the IQ back with all
Hasselblad V series cameras.
Mirror Up and Shutter Latency Setting
Set the Latency to Zero when shooting with a Hasselblad V, 903 CW and 905
CW.
Tethered Capture
Plug a FireWire 800 cable into the IQ back for tethered capture to a computer
using Capture One Pro.
To Next Page
Loading...
