PhaseOne IQ Series - Setting Date and Time Parameters

25
2.15 Setting Date And Time
Date and time parameters are set and controlled via the IQ back’s Menu
system.
If the IQ back has been without power for a long period of time, it will
automatically ask you to set the time and date on the next occasion it is
powered up.
Tap the screen and scroll through the numbers to attain the appropriate date
and time. Tap the check mark, which will appear in the bottom right hand
corner of the screen to conrm your entry.
The time and date is applied to the EXIF data in all les captured with the IQ
back.
Diopter not matching
2.16 Setting Diopter
Look through the viewnder and make sure that the focus frame (Rectangle
with Circle) is in sharp focus. If it is not, turn the diopter adjustment dial in the
“–” direction if you are nearsighted or in the “+” direction if you are farsighted.
If this is not sucient you may require an optional diopter correction lens.
Check the table for possible diopters.
Point the camera at a bright, plain object such as a white wall when making
this adjustment.
Diopter matching
Diopter correction lens Range of Adjustment
DE401 (standard) -2,5 to +2,5
DE402 (fnearsighted users)
-5,0 to -2,0
DE403 (farsighted users) 0 to +3,0