137
14.3 More Details: Mamiya RZ67
Mode Selector
The mode selector on the trigger button should be turned to the white dot
when used with the IQ back. The selector should be set to the orange dot to
avoid draining the small battery when the IQ back is attached to the body
and not in use.
Warning: Even if the IQ back is turned o, the battery will drain slowly if the
orange dot is not selected
Shutter Latency Setting Mamiya RZ PRO II
An IQ back should be set to Normal Latency when it is used with a Mamiya
RZ PRO II.
Shutter Latency Setting Mamiya RZ PRO IID
Select the special Mamiya RZPRO IID camera mode, which available in the
Camera mode menu to ensure that the correct latency setting is used.
Studio Flash Sync on the RZ lens
A ash sync lead should be connected to the port on a lens when an IQ back
is used on a Mamiya RZ67 PRO IID. On the older PRO II, use the ash sync
connector on the Adapter plate. (The ash sync port on the IQ back is for use
with Large format cameras where no digital interface is available).
Mirror Up
Mirror up operation is only recommended if using Mamiya’s own double
cable release.
Double Exposure
Is is only possible to get a double exposure when a Hasselblad V mount
plate is being used. Avoid a double exposure by waiting for a ready-beep
from the IQ back before capturing another image.
To Next Page
Loading...
Need help?
General
