EasyManuals Logo

PhaseOne IQ Series User Manual

Default Icon
165 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
16
2.5 Batteries for Camera
Set the shutter release mode selector lever to L (to turn the power o).
Use six AA alkaline or rechargeable batteries.
NiCd or NiMH batteries should only be used in the camera body if CF04 is set
on rechargeable.
1. Lift the battery case lock lever, turn it counter clockwise and pull out the
battery holder.
2. Insert fresh AA batteries with the + and - ends as shown in the
illustration.
3. Return the battery holder to its case and lock it by turning the lever
clockwise. Make sure it is rmly attached.
N.B. Ensure that the batteries are placed with proper polarity.
Rechargeable Li-ion Battery
The Phase One Rechargeable Li-Ion battery Kit for 645DF+ is included with
the Phase One 645DF+ camera body as standard. (Part #70513)
Please go to page 112 for more information about setting battery type in
custom function 4.
The Value Added kit includes 2 batteries + 1 charger. The Classic kit includes
1 battery + 1 charger.
N.B. The rechargeable Li-Ion battery can be used instead of AA batteries with
the Phase One 645DF. The uptime of one fully charged Li-ion battery is up
to 3 times longer than using standard Alkaline batteries.
Checking the Battery Power
Set the Drive dial lever to S (to turn the power on).
Check the battery condition in the lower left corner of the top LCD screen.
Always use six new batteries of the same type when replacing batteries. Do
not mix dierent types of batteries or use old batteries with new ones. The
camera will not function without a power source.
Never throw out batteries. When a battery does not work, deliver the
battery for appropriate disposal.
C
S
L
M.UP
The batteries are suciently charged.
There is little power remaining. Have new
batteries on hand. Camera will still operate.
There is very little power remaining. Camera
will not operate. Set the shutter release mode
selector lever to “L (to turn the power o) and
replace the batteries with new ones.
When the batteries are emptied for power,
“batt” ashes on the main LCD and the
viewnder’s LCD when the shutter release
button is pressed.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PhaseOne IQ Series and is the answer not in the manual?

PhaseOne IQ Series Specifications

General IconGeneral
BrandPhaseOne
ModelIQ Series
CategoryDigital Camera
LanguageEnglish

Related product manuals