126
10.9 Phase One 645DF+ Housing Specication
Camera type : 6x4.5cm format, electronically controlled focal-plane shutter, TTL multiple mode AE, AF single
lens reex
Actual Image size: 56x41.5 mm
Lens mount : Mamiya 645 AF Mount, compatible with M645 Mount (manual focus conrmation, focus aid,
stopped-down exposure metering)
Viewnder : Fixed prism viewnder magnication x0.71; built-in diopter adjustment (-2.5 to +0.5, optional
diopter correction lenses provide adjustment ranges of -5 to -2 diopter and 0 to +3 diopter); built-in eye-piece
shutter
Focusing screen : Interchangeable, Matte (standard), Checker, and Microprism Type C for Non-AF M645 lenses.
Field of view : 94%* of actual image
Viewnder info : Focus mark, defocus mark, warning mark, aperture value, shutter speed, metering mode (A, S,
A/S), exposure compensation value (dierence between set value and metered value) and ash ready/ OK lamp with
TTL Metz connection.
AF method : TTL phase dierence detection method; sensor: CCD line sensor (I+I type); operating range: EV0
to EV18 (ISO 100)
Focus area : Displays the focus area in the viewnder screen
AF assist beam : Activates automatically under low light, low contrast.
Range: 9m (when using AF80mm f/2.8 D lens)
AF lock : By pressing the shutter release button halfway down in the AF-S mode, or by pressing the AFL
button.
Exposure modes : Aperture-priority AE, shutter-priority AE, programmed AE (PH, PL setting possible), and manual
AE meteringmode : TTL metering, center-weighted average (AV), spot (S), and variable ratio (A-S auto)
Increments of shutter : Both the shutter speed and the aperture level can be set to 1/3 or speed and aperture 1/2
using the electronic dial lock function
Metering range : EV 2 to EV 19 (with ISO100 and AF80mm f/2.8 D lens)
Exposure compensation : Expandable to ±5 EV
AE lock : With AEL button; canceled by pressing the button again. When AEL button is pressed, exposure
compensation and metering dierence is displayed in the viewnder. (+-6EV, 1/3 steps in M mode).
Shutter : Electronically controlled vertical metal focal-plane shutter. (vertical travel)
Shutter speed : AE 30 to 1/4000 sec. (1/8 step), manual 30 to 1/4000 sec. (1/2 or 1/3 steps), 1 min-60 sec. (1
step), X, bulb (Bulb, electronically controlled), tIME, shutter curtain protection mechanism
Auto bracket shot:Enable with auto bracket button (3 frame shots, 5 frame or 7 frame shot with auto bracketing).
Specify 1/3, 1/2, 2/3 or 1EV steps.
Flash synch : X contact point, 1/125 seconds. Synchro speed can be changed away from terminal.
Flash control : TTL direct ash control, supports Metz SCA3002 system (SCA3952 Adapter)
Mirror up shot : Select by pressing the mirror up button.
LCD displays : Program AE mode icon, synchro mode icon, shutter speed, aperture, custom function icon, user
function icon, focal plane mode icon, lens shutter mode icon, AE lock icon, auto focus lock icon, mirror up icon, focus
area icon, auto bracketing icon, self timer icon, repeat mode icon, delay mode icon, remaining battery power icon, spot
metering icon, dial lock icon, ash compensation icon, exposure compensation icon, exposure compensation, delay
time.
Sync terminal : X contact (sync speed 1/125 sec.)
Cable release socket : On shutter button
Remote-control terminal : On side of body; electromagnetic cable release RE401 and RS402
Self timer : Self timer intervals can be set from 0.5 to 90 sec.: 0.5-10 sec. by the second, 10 to 90 sec. in 10 sec.
units, 2 to 10 mins by the minute and 10 to 6 mins in units of 10 minutes.
Depth-of-eld conrmation : Preview Button on body
Custom settings : 19 items
Tripod socket : U 1/4 inch and U 3/8 included
Power requirements : Rechargeable Li-ion battery or 6 AA batteries (alkaline or rechargeable)
External power socket : An external battery case can be connected.
Size & weight : 6 ”(W)X5 ”(H)X6 ”(D) / 153(W)X128(H)X152(D)mm
2.3 pounds / 1,030 g (body only)
* This information is based on a linear (horizontal/vertical) measurement.
To Next Page
Loading...
Need help?
General
