147
16.3 More Details: Hasselblad H Series
Camera Display
The Hasselblad H1/H2 incorporates a screen that displays information about
the camera set-up. It shows the aperture value, AF mode, shutter speed etc.
The Hasselblad H1/H2 will also display some IQ back information on this
screen. For example, error messages including ”Digital back storage media
is full” will be displayed on the screen if the CompactFlash in the IQ back is
full to capacity.
ISO Settings
The ISO value is also displayed on the H1/H2 camera screen. The ISO setting
can be adjusted from the camera back or in Capture One software when
shooting tethered.
Please consult page 61 of this manual for details on setting the ISO. Go to
page 53 for more information about tethered shooting.
Auto Exposure
All the Hasselblad H1/H2 auto exposure modes are fully supported by the
IQ back.
Please check the relevant Hasselblad H-series manual for more information
on exposure modes.
To Next Page
Loading...
Need help?
General
