PhaseOne IQ Series - Auto Preview Mode; Display; Brightness; Display off Time

89
7.11 Auto Preview Mode
The Auto Preview option can be switched On or O. Select On to revert to a
Play mode when shooting. Select O to remain on the same display.
7.12 Display
The Display menu option has four options: Brightness, Display O Time,
Splash Screen and Background Image. (See below and page 88 for more
details).
Brightness
Set the brightness of the preview LCD screen to suit ambient viewing
conditions. The default setting is 80% but in bright outdoor illumination
this can be increased up to 100%. Users may choose to lower the Brightness
when working in low light environments, such as a photographic studio.
Altering the Brightness setting will only aect the brightness of the screen.
It will NOT aect the Exposure Warning, Histogram and exposure of a nal
capture.
Display O Time
Switch o the IQ’s screen after 5 seconds, 20 seconds, 1 minute, 5 minutes.
The display can also be set to remain permanently on while the IQ is in
operation with the Always On option.