84
7.2 Format Card
Select Format Card to erase all data on a memory card. Memory card
formatting is done in either FAT 16 or FAT 32 depending on card size. (IQ2
backs support CompactFlash cards formatted in both FAT 16 and FAT 32).
7.3 WiFi
All IQ2 digital backs can connect wirelessly with an iOS device like an iPad®
or iPhone®. Before you start, download and install Capture Pilot on your iOS
device from the Apple App Store.
There are two primary ways to connect your IQ2 digital back to an iOS device:
direct for a range of up to 8m/25ft or via a router for a range up to 30m/100ft.
Connect directly using Adhoc mode
1. Go to Menu>WiFi>Mode and tap the Adhoc option. This will publish a
network with default name “PhaseOne[seial number]”
2. From the iPad®/iPhone®: General>WiFi>Connect to network:
“PhaseOne[seial number]”
3. Start Capture Pilot and select the “PhaseOne[serial number]” under Local
Servers
N.B In the iPad Wi-Fi settings use the Icon to unfold the network settings of
the IQ2 network – then switch on the “Auto-Join” to ensure that the
connection will always reconnect if it looses connection.
To Next Page
Loading...
Need help?
General
