Device Standards
HD11 XE Getting Started
4535 612 62651
6
130
Approved Transducers for Electromagnetic Compliance
The imaging transducers used with the ultrasound system may affect its emissions.
The transducers listed in Table 7-1 on page 146, when used with the ultrasound
system, have been tested to comply with the Group 1, Class B emissions as
required by International Standard CISPR 11.
Approved Accessories for Electromagnetic Compliance
Accessories used with the ultrasound system may affect its emissions. The acces-
sories listed in Table 6-5, when used with the ultrasound system, have been tested
to comply with the Group 1, Class B emissions as required by International Stan-
dard CISPR 11.
When connecting other customer-supplied accessories to the system, such as a
remote video monitor or a computer, it is the user’s responsibility to ensure the
electromagnetic compatibility of the system. Use only CISPR 11 or CISPR 22,
Class B compliant devices, unless otherwise noted.
Table 6-5 Approved Accessories for Electromagnetic Compliance
Accessory Manufacturer Model Number
Ultrasonic Imaging
Transducer
Philips Use only Philips
transducers.
VCR Mitsubishi HS-MD3000
Black-and-White Printer Sony UP-D895MD
Color Printer Sony UP-D23MD
Color Laser Jet Printer Hewlett-Packard Make sure that the printer
is authorized by Philips and
that you have obtained a
COTS CD-ROM from your
Philips-qualified service
representative.
Black-and-White Laser Jet
Printer
Hewlett-Packard
Ink Jet Printer Hewlett-Packard
To Next Page
Loading...