Philips HD11 XE - Page 49

2
HD11 XE Getting Started
4535 612 62651
49
Safety
W
ARNINGS
• Do not remove the system covers.
• Do not attempt to service the system yourself. Only qualified personnel
should service the system.
• Do not touch accessible connector pins and the patient simultaneously.
• Be very careful not to touch internal electrical circuits. Accidently contacting
internal electrical circuits could cause serious injury.
• To avoid electrical shock, use only the supplied power cords and connect
them only to properly grounded wall outlets.
• Connect all equipment supplied with the system only into the 115-Vac outlets
provided. Connecting equipment supplied with the system to a wall outlet can
cause excessive enclosure leakage current.
• Do not connect items to the ultrasound system that are not specified by Phil-
ips as part of the system. See “Explosive Hazards” on page 52.
• Do not connect additional multiple-socket outlets or extension cords to the
system.
Installation Requirements
The system is designed to be installed by qualified service personnel. Installation
of the system by a Philips service representative is included in the purchase price
of all new systems purchased from Philips.