Pitney Bowes Epic - Page 170

Transfer Interface Module (TIM) Setup
TheTIMislocatedinthefolderandtransfersthecollationtothenextdownstreammodule(buffer)
withoutfoldingit.Itisusedwhenrunninganon-foldapplication.
WhenchangingjobstheTIMmodulemayormaynotbeneededdependingonwhetherthejobcallsfora
foldapplication.PartofthejobsetupmayrequireyoutoinstallorremovetheTIM.(Dependingonthe
stylebufferyouhave(manualorswitch),installationandremovaloftheTIMwillbeslightlydifferent.)
TIMModule
Job Changeover Guidelines
Pitney Bowes Epic Select Operator Guide December,2017 Page 164 of 288