SV63136 Rev. A
7-13
Add-On Modules • 7
6. Verify the following:
• There are sufficient funds for the job on the mailing system
• The MMI is working; and
• The correct mode is set on the mailing system.
7. Press the Start button on the inserting system.
The inserting system begins to assemble pieces of mail, which the mail-
ing system will then accept and process. The mailing system sends the
inserting system a message for each exiting piece of mail.
Clearing a Jam
If a jam occurs on the mailing system while processing mail with the MMI,
the Connect+ displays the area of the jam along with user instructions.
Follow the on-screen instructions for clearing a jam.
To Next Page
Loading...
