X-Series Hyperconverged Nodes Powered by Acuity
Setup & User Guide, v1.0
| 40
DOC-246-GDE-Pivot3 Acuity 2.3 Setup & User Guide-v1.0.docx
5. Volume – Host Connection
This component shows details about the volumes, the hosts and vPGs they belong to, and all iSCSI Connection
statuses to them. A refresh icon ( ) is available at the top right of the component to update the displayed
information whenever necessary. When populated, the columns for Volume Name, Host IP, and vPG Name have a
filter function ( ) for limiting the amount of information displayed. The numbers shown in the iSCSI Connection
column represent the number of connection paths between the ESXi Server iSCSI initiator and the volume, and
whether the connections are active or inactive.
6. Device Health State
This component lists the summary of devices that are failed or rebuilding or otherwise need administrative
attention. This component will only be populated if there are errors on any assigned/unassigned nodes. In the
case of assigned nodes, vPG name will be listed.
To Next Page
Loading...