19.5.10 Screensaver
It is possible to configure the dental unit so that a screensaver is displayed
when the
Sign in
window has been unused for 3 minutes. To take a standard
or custom screensaver into use, contact your Planmeca dealer.
19.6 Network settings
The front page of
About this unit
shows the dental unit’s IP address next to
Network settings
. Press > to display the dental unit's network settings.
Press the
Romexis
tab to view network settings related to the Planmeca
Romexis connection.
The following network settings are displayed:
• Romexis connection
• Name of dental unit
• MAC address
• DHCP
• IP address
• Network mask
• Gateway
• Romexis server IP address
• Romexis server port
• Communication protocol
Press the
Solanna Vision
tab to view network settings related to the
Planmeca Solanna Vision operating light.
The following network settings are displayed:
• DHCP
• MAC address
• IP address
• Network mask
• Gateway
CAUTION
The network settings may only be edited by a qualified Planmeca service
technician.
19.7 Message history
Message history
displays help and error messages when you press >.
For information on how to use the message log, see section "Viewing help
and error message history" on page 290.
19.8 Bluetooth
When you press > next to
Bluetooth
, you are directed to a window where
you can enable or disable the Bluetooth connection.
19.9 Licences
Licences
displays the licences used by the dental unit when you press >.
19 Checking dental unit details
102 Planmeca Compact i User's manual
To Next Page
Loading...
Need help?
General
