Hands-free with sensor
Once the operation light is lit, keep your hand longer in front of the sensor to
adjust the intensity of the light.
NOTE
If the operating light is installed to another manufacturer’s dental unit, the
intensity adjustment can be done only from the operating light.
From dental unit
The light intensity of the composite mode is displayed on the Composite
mode button. When you change the intensity, the information on the button
changes accordingly.
Control panel: Press and hold the Composite mode button to adjust the light
intensity of the composite mode.
NOTE
The dental unit can be configured so that the operating light's intensity in the
composite mode can be adjusted when you press and hold the Flexy button.
Contact your Planmeca dealer.
NOTE
The foot control can be configured so that the intensity is adjusted when you
push and hold the left-side or the right-side knob up. Contact your Planmeca
dealer.
22.6.6 Changing light tone of operating light
The white light tone of the operating light can be warm, neutral or cool.
22 Operating dental unit
User's manual Planmeca Compact i 125
To Next Page
Loading...
Need help?
General
