Foot control: Push the left-side knob up to switch the operating light on/off.
This is the default factory setting.
NOTE
The foot control can also be configured so that the operating light is switched
on/off when you push the right-side knob up. Contact your Planmeca dealer.
22.6.3 Switching composite mode on/off
The composite mode allows you to work with composite materials with
minimal risk of pre-polymerisation caused by the operating light.
The composite mode turns off automatically when another instrument than
the polymerisation light is picked up from the instrument console.
From operating light
From one handle
Press twice the handle button on either handle to switch to composite mode.
Press the handle button twice again to switch the composite mode off.
You will hear a clicking sound each time you press the button.
22 Operating dental unit
User's manual Planmeca Compact i 121
To Next Page
Loading...
Need help?
General
