30 Planmeca ActiveAqua
30.1 Introduction
CAUTION
No chemicals must be added to the Planmeca ActiveAqua water treatment
system.
Planmeca ActiveAqua is a water treatment system that produces clean and
soft water for dental unit instruments and cup fill. It also feeds clean water for
suction rinsing and bowl flush on occasion. All the water used by the dental
unit runs through an air gap, which fulfills the EN1717 standard.
The clean water is disinfected without any added chemicals. The disinfection
process, which is based on electrolysis, removes microorganisms, provides
total biofilm control and guarantees a safe treatment environment for both
the dental team and the patients.
When Planmeca ActiveAqua is installed to the dental unit, instrument
flushing and suction cleaning are performed daily as instructed in section
"Flushing and cleaning programs" on page 210. As Planmeca ActiveAqua
takes care of water disinfection, neither the Waterline Cleaning System nor
the Planmeca WEK water disinfection system is available for dental units
equipped with Planmeca ActiveAqua.
Planmeca ActiveAqua maintenance parts
1 Prefilter
30 Planmeca ActiveAqua
User's manual Planmeca Compact i 253
To Next Page
Loading...
Need help?
General
