27 Cuspidor parts
The different parts of the cuspidor that require maintenance and cleaning are
presented in the picture below.
1. Instrument flushing holder
2. Coarse filters
3. Suction tube cleaning holder
4. Suction disinfectant container
5. Amalgam collector / deposit cup (units with no suction system or with
Dürr CAS1 or CS1 suction system)
Cuspidor parts related to the Planmeca ActiveAqua water treatment system
are presented in section "Introduction" on page 253.
27 Cuspidor parts
User's manual Planmeca Compact i 209
To Next Page
Loading...
