NOTE
If the chair is equipped with a chair-mounted left/right suction arm, make
sure that the Flexy-holder does not hit the cuspidor when driving the chair
up.
NOTE
If the chair is equipped with a chair-mounted left/right suction arm, make
sure that the Flexy-holder is not above the cuspidor when driving the chair
down. If the chair does not move downward and H 03 is displayed, check
that the chair-mounted arm is not in the upmost position. This arm position
prevents the chair from moving downward.
11.2 Flexy-holder
The suction handpieces are placed in the Flexy-holder.
The Flexy-holder is a suction holder that is attached to the suction arm. Its
integrated control panels enable you to control selected functions of the
11 Suction system
60 Planmeca Compact i User's manual
To Next Page
Loading...
Need help?
General
