dental unit. For more information on the control panel, see section "Control
panel on Flexy-holder" on page 76.
The Flexy-holder has three openings. The two left-most openings can be
equipped with suction handpieces and the right-most with the assistant’s
syringe. In addition, one or two supplementary holders or a holder for the
intraoral scanner can be placed on either side of the Flexy-holder. The
supplementary holder can be equipped with a USB intraoral camera or a
polymerisation light.
1. Saliva suction handpiece
2. High-volume suction handpiece
3. Syringe
Removing holders
The suction tube, instrument and supplementary holders can be removed
from the Flexy-holder, for example for cleaning.
Remove the suction tube holder by pulling it downward from the Flexy-
holder. To replace it, push it firmly into its place.
11 Suction system
User's manual Planmeca Compact i 61
To Next Page
Loading...
